Florida Budget Guide · Published October 24, 2026 · AI-assisted planning guide. No independent professional review is claimed. Editorial policy.
A home supplied by a private well does not receive a public-water consumption bill, but moving water can still add electricity to the household budget. This worksheet helps a Florida well owner estimate that specific load using measured energy or a clearly labeled operating scenario. It does not diagnose pump condition, choose pressure settings or determine water quality. Those questions require the relevant equipment and qualified professional guidance.
Identify the pump and measurement boundary
Record the exact equipment and identify which loads are included in the reading. A complete well-system measurement may include controls or treatment equipment, while a pump-only estimate does not. Motor capacity is not automatically continuous electrical consumption. For pump input, use supported power information or suitable professional measurement. For operating time, distinguish actual pumping from hours when the system is available. For other equipment, identify treatment and controls separately. For service expense, keep inspections and repair invoices outside electricity.
Calculate a representative operating period
Where a suitable meter provides energy for the relevant equipment, price that measured quantity directly. If estimating from power and runtime, show both assumptions and convert watts into kilowatts before calculating energy. Do not multiply the motor’s maximum rating by every hour in a month. Compare ordinary periods with similar household occupancy and outdoor use; a temporary irrigation or guest-use increase should not silently become the permanent household baseline.
Use unusual consumption as a question, not a diagnosis
Keep the operating record and the corresponding household bill together so the rate and dates remain traceable. If observed consumption changes unexpectedly, document the timing and ask the responsible well professional what investigation is appropriate. Do not alter pressure controls, access electrical equipment or reduce required system operation to make the worksheet total smaller. Budget any quoted service separately, then update the electricity allowance after representative operation is documented again.
Build your own itemized estimate
Use this topic-specific checklist to collect the actual scope and written amounts. Keep the quote date beside each figure; an unknown charge should stay blank until checked.
| Cost or decision | What to verify | Your amount / date |
|---|---|---|
| Pump energy boundary | Identify whether the measurement covers the pump alone or other well-system equipment | __________ |
| Observed runtime | Use actual pumping time or clearly labeled scenario hours rather than continuous availability | __________ |
| Applicable electricity price | Apply the documented variable charges and keep fixed household service fees separate | __________ |
| Equipment service | Track professional inspection and repair spending outside the electricity subtotal | __________ |
Worked example with fictional inputs
These figures demonstrate the arithmetic only. They are not Florida market prices, current fees, or provider quotes. Follow the units named in each input.
- Pump kw
- 0.75
- Daily running hours
- 2.00
- Days
- 30.00
- Rate per kwh
- 0.15
Calculation: pump_kw * daily_running_hours * days * rate_per_kwh
Illustrative result: 6.75 USD
Illustrative arithmetic using invented power, runtime and electricity price. These inputs are not a pump specification, Florida tariff or forecast of a household’s actual consumption.